SKU:
Siemens SKD62 Electrohydraulic Actuator
Electrohydraulic actuator, 1000 N, 20 mm, AC 24 V, DC 0…10 V/4…20 mA, spring return with fail-safe function. Overload-proof through travel-dependent, electronic switching off in end position. With die-cast aluminium housing and yoke for valves with 20 mm stroke. Optional function with one auxiliary switch. With manual control.
SKD6.. op. voltage AC 24 V, control signal DC 0…10 V, 4…20 mA, 0…1000 Ω
– SKD62/MO RS-485 for Modbus RTU communication
– Selectable flow characteristic, position feedback, stroke calibration, LED status
indication, override control
– SKD62UA with selection of direction of operation, stroke limit control, sequence control with adjustable start point and operating range, operation of frost protection monitors QAF21.. and QAF61..
- Positioning force 1000 N
- For direct mounting on valves; no adjustments required
- With hand crank and position indication; optionally with/out spring-return function
- Optional functions with auxiliary switches, potentiometer, stem heater and mechanical stroke inverter
- SKD..U are UL-approved
